Electric Cable Reel
Product Overview
T1D Series Constant Tension Cable Reels portable electrical equipment is mainly used for automatic retractable cables, to ensure safety in production, to extend the cable life.
T1D cable reel structure is simple, reliable performance, installation and use, primarily applicable to gantry crane, tower cranes, bridge cranes and other mobile devices, large, small car.
Structural characteristics
1, tension constant, electro-magnetic tension adjustment range, the user needs to adjust better under the constant tension upon tension.
2, synchronization performance is good, because of cable reel has a good slip properties, so take-up reel speed and mobile device synchronization speed.
3, self-locking performance of good, cable reel motor power, in order to winding the tube on the cable does not slip, the machine set up with self-locking performance of the turbine to pay devices.
Work Principle
T1D-type cable reel use, there are two
, power on mobile devices running the end, when the cable drum roll, the reel motor power, driving drum roll through the transmission cables, cable release, the mobile devices running the cable reel in the opposite direction pulling the release cable rotation at this time, reel motors to stop working, slip body slip.
2, the power in the middle of mobile devices, mobile travel, the volume when the reel motor driven cable reels volume-driven cable drive system, when the mobile device to walk over the power position, cable pulling reel in the opposite direction movement of cable, this time roll electrical work as usual, while slipping to expedite the skid.
Dimension and the structure
| Size Model | T1D-Ⅰ | T1D-Ⅱ | T1D-Ⅲ | T1D-Ⅳ | T1D-Ⅴ |
| A | 80 | 210 | 220 | 233 | 250 |
| B | 200 | 175 | 270 | 330 | 445 |
| H | 97 | 145 | 160 | 185 | 200 |
| H1 | 257 | 505 | 530 | 548 | 715 |
| L1 | 242 | 602 | 665 | 750 | 820 |
| L2 | 76 | 50 | 54 | 75 | 110 |
| L3 | 440 | 276 | 355 | 425 | 530 |
Specifications
| Type | apply to cable (mm 2 ) | take-up speed (m / min) | take-up torque (NM) | take-up distance (m) | host weight (Kg) | ||
| cross-sectional area | diameter | level | Vertical | ||||
| T1D-Ⅰ | 4-6 | Φ21 | ≤60 | ≤30 | ±70 | 40 | 55 |
| T1D-Ⅱ | ≤25 | Φ36 | ≤40 | ≤90 | ±100 | 60 | 88 |
| T1D-Ⅲ | ≤35 | Φ39 | ≤45 | ≤180 | ±150 | 80 | 120 |
| T1D-Ⅳ | ≤50 | Φ46 | ≤45 | ≤350 | ±150 | 100 | 225 |
| T1D-Ⅴ | ≤70 | Φ51 | ≤45 | ≤460 | ±150 | 120 | 245 |
| Note: If you choose more than in the previous table, cable reel, please use our factory production TIC hysteresis cable reel. | |||||||