Lifting Electromagnet
Uses
1, For metallurgy, mining, foundry, machinery, transportation and other industries such as steel guide magnetic lifting.2, For electromagnetic several mechanical hand gripping guide magnetic steel.
Features
1, All-welded structure, moisture-proof performance is good.2, Reasonable magnetic circuit design, high-quality low-carbon steel plate, thermal conductivity, heat-resistant properties of superb quality mica improved lifting electromagnet thermal efficiency.
3, Excitation coil optimized design, special treatment, improved electrical and mechanical properties of the coil.
4, Ordinary type rated power lifting electromagnet sustained rate of 60%, increased efficiency in the use of the lifting electromagnet.
5, High temperature insulation lifting electromagnet unique ways in which the temperature was raised to absorption material 700 ℃, extends the scope of application of lifting electromagnet.
6, Installation and maintenance easy.
Selection Notes
1, Ssmoking and transportation of materials at temperatures below 100 ℃, please use temperature-type lifting electromagnet, more than 100 ℃, please use high-temperature-type lifting electromagnet.2, Sustained rate of over 60% of power when you use high-frequency type.
3, Water, smoke hanging materials, please use submersible type (diving depth ≤ 100m). Submersible lifting electromagnet its parameters with the same type at room temperature. If users need to dive-type lifting electromagnet, please note when ordering.
4, Ambient temperature: Normal temperature type -20 ℃ ~ 40 ℃, high temperature -20 ℃ ~ 80 ℃. A height of not more than 2500 meters above sea level. Humidity of not more than 85%.
5, Device matching: a single use, please click power consumption (current) choice rectifier control equipment and auxiliary equipment; more than one GC, press the number of units combined with the consumption of power (current) of and options.
Type Description
>> MW5 series lifting electromagnet used for lifting scrap
Uses: Suitable for handling cast iron ingots, balls and all kinds of scrap.
Normal temperature type (normal use, power continued to rate TD-60%. DC-220V) Main technical parameters
 |
MW5-70L/1 | MW5-110L/1 | MW5-130L/1 | MW5-150L/1 | MW5-165L/1 | MW5-180L/1 | MW5-210L/1 | MW5-240L/1 | |
| Dimensions | A | 700 | 1100 | 1300 | 1500 | 1650 | 1800 | 2100 | 2400 |
| B | 800 | 1080 | 1210 | 1220 | 1230 | 1470 | 1800 | 2020 | |
| Weight(kg) | 500 | 1250 | 2050 | 2700 | 3400 | 4100 | 6800 | 9000 | |
| Power(kw) | 32 | 7 | 11.9 | 15.6 | 19.8 | 22.4 | 27.9 | 33.9 | |
| Cold Current(A) | 14.7 | 35.1 | 54 | 71 | 90 | 102.4 | 127 | 154 | |
| Re-absorption capacity(kg) | Ball | 2500 | 6500 | 8500 | 11000 | 13000 | 14500 | 17000 | 26000 |
| Iron ingot | 380/200 | 1000/800 | 1400/1100 | 1900/1500 | 2300/1800 | 2750/2100 | 3200/2500 | 4800/3800 | |
| Scrap | 120/100 | 450/400 | 700/600 | 1100/900 | 1350/1040 | 1600/1350 | 2000/1600 | 2850/2250 | |
| Note: The Diving-type lifting electromagnet technical parameters and temperature the same type electromagnet | |||||||||
High-frequency-type (normal use, power continued to rate TD-75%. DC-220V) Main technical parameters
|
MW5-110L/1-75 | MW5-130L/1-75 | MW5-150L/1-75 | MW5-165L/1-75 | MW5-180L/1-75 | MW5-210L/1-75 | MW5-240L/1-75 | |
| Dimensions | A | 1100 | 1300 | 1500 | 1650 | 1800 | 2100 | 2400 |
| B | 1270 | 1290 | 1360 | 1670 | 1600 | 1900 | 2020 | |
| Weight(kg) | 1500 | 2280 | 3180 | 3840 | 4690 | 7500 | 9800 | |
| Power(kw) | 6.1 | 9 | 11.3 | 12.2 | 16.3 | 21.7 | 25.9 | |
| Cold Current(A) | 27.7 | 40.9 | 51.4 | 55.5 | 74.1 | 98.6 | 117.7 | |
| Re-absorption capacity(kg) | Steel | 6500 | 8500 | 11000 | 12500 | 14500 | 21000 | 26000 |
| Iron ingot | 1000/800 | 1400/1100 | 1900/1500 | 2300/1800 | 2750/2100 | 3500/2800 | 4800/3800 | |
| Scrap | 450/400 | 700/600 | 1100/900 | 1300/1100 | 1600/1350 | 2200/1850 | 2850/2250 | |
High temperature type (High Temperature < 700 ℃ below ", and electricity supply continued to rate TD-60%, DC-220V) Main technical parameters
|
MW5-70L/2 | MW5-110L/2 | MW5-130L/2 | MW5-150L/2 | MW5-165L/2 | MW5-180L/2 | MW5-210L/2 | MW5-240L/2 | |
| Dimensions | A | 700 | 1100 | 1300 | 1500 | 16500 | 1800 | 2100 | 2400 |
| B | 824 | 1225 | 1280 | 1330 | 1350 | 1515 | 1912 | 2100 | |
| Weight(kg) | 520 | 1690 | 2300 | 32600 | 3800 | 4700 | 7550 | 9800 | |
| Power(kw) | 2.81 | 5.28 | 8.9 | 11.3 | 14.3 | 16.7 | 22 | 25.9 | |
| Cold Current(A) | 12.77 | 24 | 40.5 | 51.4 | 65 | 75.8 | 100 | 117.7 | |
| Re-absorption capacity | Steel | 2500 | 6500 | 8500 | 11000 | 1300 | 14500 | 17000 | 26000 |
| Iron ingot | 380/200 | 1000/800 | 1400/1100 | 1900/1500 | 2300/1500 | 2750/2100 | 3200/2500 | 4800/3800 | |
| Scrap | 120/100 | 450/400 | 700/600 | 11000/900 | 1350/1040 | 1600/1350 | 2000/1600 | 2850/2250 | |
MW □ 4 series of steel lifting electromagnet
Uses
This series of products designed specifically for lifting steel plate, lifting safety, quick and accurate. Selection of time to consider when operating plate bending deformation will affect the safe handling, must pay attention to the length of the electromagnet and the plate thickness and the width between, taking a long steel lifting plate (6mm ~ 32mm) the spacing between electromagnets in order to 3-4 meters is appropriate, at both ends protruding part of the length of the pitch to take one-half.
MW84 Series (350 type) plate lifting electromagnets
Uses
Is suitable for plate factory, shipyard, all types of machinery factories, or lifting a certain number of sheets of steel plate to use, with a lightweight, low power consumption characteristics, according to the user's requests for a separate design and manufacture of lifting steel plate used in the following 700 ℃ high temperature products.
MW84 Series (350 type) at room temperature type (Rated voltage DC-220V, power continued to TD-60%) Main technical parameters
| Model | MW84-9030T/1 | MW84-10535T/1 | MW84-14035T/1 | MW84-17535T/1 | MW84-21035T/1 | MW84-24535T/1 | |
| Dimensions | A | 900 | 1050 | 1400 | 1750 | 2100 | 2450 |
| B | 300 | 350 | |||||
| C | 900 | 960 | 940 | 940 | 920 | 980 | |
| D | 350 | 400 | 500 | 700 | 800 | 900 | |
| E | 110 | ||||||
| F | 180 | ||||||
| G | 32 | ||||||
| Weight(kg) | 185 | 330 | 430 | 510 | 600 | 720 | |
| Cold Power(kw) | 0.41 | 0.9 | 1.2 | 1.5 | 1.8 | 2.5 | |
| Note: MW81-9030T for the DC-110V | |||||||
For example, the number of sheets to ensure removal
| Plate Width | 1500(mm) | 2500(mm) | 4000(mm) | ||||||||||||||||||
 |
6 | 8 | 10 | 12 | 16 | 20 | 32 | 6 | 8 | 10 | 12 | 16 | 20 | 32 | 6 | 8 | 10 | 12 | 16 | 20 | 32 |
| MW84-10535T/1 | 4 | 3 | 3 | 3 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||
| MW84-14035T/1 | 4 | 4 | 3 | 3 | 2 | 2 | 1 | 3 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | ||||
| MW84-17535T/1 | 4 | 4 | 3 | 3 | 2 | 2 | 1 | 4 | 3 | 3 | 3 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| MW84-210535T/1 | 4 | 4 | 3 | 3 | 2 | 2 | 1 | 4 | 3 | 3 | 3 | 2 | 2 | 1 | 1 | 2 | 2 | 1 | 1 | 1 | |
| MW84-24535T/1 | 4 | 4 | 3 | 3 | 2 | 2 | 1 | 4 | 3 | 3 | 3 | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 1 |
MW84 Series (400 type) plate lifting electromagnets
Uses
For iron and steel enterprises plate factory, steel base with the terminal half of operation, more than hanging together, one can carry a few Zhang plate.
MW8 series (400) (Rated voltage DC-220V, power sustained rate of TD-60%) Main technical parameters
| Model | MW84-12040L/1 | MW84-16040L/1 | MW84-20040L/1 | MW84-24040L/1 | MW84-13042L/1 | MW84-17042L/2 | MW84-21042L/2 | MW84-25042L/2 | |
| Dimensions | A | 1200 | 1600 | 2000 | 2400 | 1260 | 1680 | 2100 | 2520 |
| B | 400 | 420 | |||||||
| C | 1020 | 1000 | 970 | 890 | 1040 | 1050 | 1000 | 990 | |
| D | 400 | 700 | 800 | 700 | 500 | 700 | 800 | 900 | |
| E | 110 | ||||||||
| F | 180 | ||||||||
| G | 32 | ||||||||
| Weight(kg) | 550 | 690 | 840 | 910 | 650 | 850 | 1050 | 1250 | |
| Cold Power(kw) | 3.0 | 3.2 | 5.0 | 6.0 | 2.4 | 3.7 | 4.0 | 4.8 | |
For example, the number of sheets to ensure removal
| Plate Width | 1500(mm) | 2500(mm) | 4000(mm) | ||||||||||||||||||
|
6 | 8 | 10 | 12 | 16 | 20 | 32 | 6 | 8 | 10 | 12 | 16 | 20 | 32 | 6 | 8 | 10 | 12 | 16 | 20 | 32 |
| MW84-12040L/1 | 6 | 5 | 4 | 4 | 3 | 3 | 1 | 3 | 3 | 3 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | ||||
| MW84-16040L/1 | 7 | 5 | 5 | 5 | 3 | 3 | 1 | 6 | 4 | 4 | 4 | 3 | 2 | 1 | 1 | 2 | 2 | 2 | 1 | ||
| MW84-20040L/1 | 7 | 5 | 5 | 5 | 3 | 3 | 1 | 6 | 5 | 4 | 4 | 3 | 3 | 1 | 2 | 3 | 3 | 2 | 2 | 1 | |
| MW84-24040L/1 | 7 | 5 | 5 | 5 | 3 | 3 | 1 | 7 | 5 | 5 | 4 | 3 | 3 | 1 | 3 | 3 | 3 | 3 | 3 | 2 | 1 |
Mw04 series of leaflets sheet lifting electromagnet
Uses
Small-diameter round electromagnet for lifting thin sheet steel, long steel plate. Mechanical fixture of the electromagnet can be used as a magnetic hand, with the days start very small objects. Selection of points to note for steel plate thickness, width, length and weight in order to select the best model specification of the electromagnet, Number of units as well as ancillary rectifier control equipment.
MW04 series (normal temperature type) (Rated voltage DC-110V, power sustained rate of TD-60%) Main technical parameters
| Model | MW04-17T/1 | MW04-22T/1 | MW04-32T/1 | MW04-40T/1 | |||||
| Dimensions | A | 165 | 216 | 318 | 406 | ||||
| B | 113 | 147 | 178 | 480 | |||||
| C | 30 | 40 | 60 | 100/55 | |||||
| D | 10 | 16 | 25 | 16 | |||||
| Weight(kg) | 7 | 15 | 30 | 75 | |||||
| Cold Power(kw) | 0.10 | 0.20 | 0.25 | 0.40 | |||||
| A single lifting the maximum size (mm) length × width | 1200 1200 | 1400 1400 | 1600 1600 | 2500 2500 | |||||
| When the burden of more than one dimension (mm) length × width | 600 1200 | 700 1400 | 800 1600 | 1000 2500 | |||||
| Suction | Thickness(mm) | 32 | 6 | 6 | 10 | 10 | 20 | 12 | 32 |
| Peripheral Fixed(kg) | 100 | 200 | 300 | 600 | 800 | 2000 | 1300 | 4000 | |
Yx series switch permanent magnet sucker
Introduction
YX series of permanent magnet lifting sucker is used mainly in the lifting process of suction-type holding plate-like or cylindrical workpiece guide magnetic materials, with structure, light, easy to operate, suction holding the country strong, safe and reliable, helping improve the work efficiency. Because some in factories, docks, warehouses and transportation operations have been widely used as a lifting tool.
Works
YX series of high-energy permanent magnet lifting NdFeB permanent magnetic materials used sucker, in the magnetic circuit generated a very strong suction holding force, which by means of rotating the handle in a very Mandrel to jack off to work or without external power supply . When the jack is in working condition when the jack holding the bottom of the suction surface constitute a pair of vertical poles, the magnetic guide the workpiece firmly held suction, suction holding the surface there are V-groove, it can suck holding plate shaped workpiece, but also holding a cylindrical workpiece suction.
Model Description
Overall and installation dimensions
| Model | Weight(Kg) | L | B | H | R |
| YX1-1 | 3 | 90 | 63 | 68 | 145 |
| YX1-4 | 11 | 160 | 95 | 180 | 160 |
| YX1-6 | 22 | 220 | 115 | 125 | 230 |
| YX1-10 | 40 | 160 | 145 | 145 | 280 |
| YX1-15 | 48 | 310 | 145 | 145 | 280 |
| YX1-20 | 60 | 340 | 160 | 165 | 410 |
| YX1-30 | 90 | 420 | 185 | 185 | 510 |
Technical parameters 1 (sucker's performance)
| Item | YX1-1 | YX1-4 | YX1-6 | YX1-10 | YX1-15 | YX1-20 | YX1-30 |
| Handle to manipulate the rate of≤(Kg) | 8 | 8 | 8 | 8 | 8 | 12 | 12 |
| Residual magnetic≤(Kg) | 2 | 2 | 2 | 2 | 2 | 3 | 3 |
| Pull-out Force≤(Kg) | 250 | 1200 | 1800 | 3000 | 4500 | 5000 | 7500 |
Technical parameters 2 (the relationship between magnetic materials and suction)
Technical Data 3 (surface roughness of the relationship between the magnetic and suction)
YX1D series of permanent magnet
Introduction
Electric permanent magnet is my factory with manual lifting electromagnet magnetic sucker, and the working principle of the two melting as a clever one, and the development of a new generation lifting gear. The product is power without losing magnetism, no power failure protection device suitable for shipbuilding, engineering machinery, automobile industry, steel plate lifting operations, in particular, flame cutting machine for large flat sling flat upper and lower feed.
Model Description
YX1D Series Electric permanent magnet
Works
Permanent magnet electric suction by the suction lift magnets magnetic steel plate, through the power to control their material absorption and desorption operations.Features
1, Using the latest permanent-magnet materials, no power consumption when the smoke hanging.2, With magnetic transfer function.
3, Power outages without losing magnetism, no power failure protection devices, work safe and reliable.
4, Low energy consumption, public suction, discharge, when electricity.
5, Simple structure, installation and commissioning, easy to maintain.
Overall and installation dimensions
| Type | lifting capacity (Kg) | Weight (Kg) | Dimension (mm) | working system | |||
| A | B | C | H | ||||
| YX1D-10 | 1000 | 180 | 800 | 420 | 480 | 720 | Continuous |
| YX1D-20 | 2000 | 280 | 850 | 460 | 500 | 750 | |
| YX1D-40 | 4000 | 360 | 900 | 540 | 520 | 800 | |
| YX1D-60 | 6000 | 440 | 950 | 620 | 540 | 850 | |
YX1D Series Electric permanent magnet
Works
Permanent magnet electric suction by the suction lift magnets magnetic steel plate, discharge, through the electromagnet to change the way to leak the ferro-magnetic.Features
1, using the latest rare earth permanent magnet materials, smoking and hanging power consumption when no2, with magnetic transfer function.
3, power outages without losing magnetism, no power failure protection devices, work safe and reliable.
4, low energy consumption, saving over 90%.
5, simple structure, installation and commissioning, easy to maintain.
Overall and installation dimensions
| Type | lifting capacity (Kg) | Weight (Kg) | Size mm | ||
| L | B | H | |||
| YX1DC-10 | 1000 | 75 | 360 | 250 | 140 |
| YX1DC-20 | 2000 | 140 | 640 | ||
| YX1DC-30 | 3000 | 200 | 900 | ||
| YX1DC-40 | 4000 | 260 | 1200 | ||